化學配方數據庫
| 配方類型： |
COATINGS |
| 配方說明： |
Powder Coating Compounds |
| 配方組成： |
"Geon" Dispersion Drying Resin/3
FORMULA No.4 (General Purpose Coating-Expanded
DIDP Plasticizer/30-50
(Leave out "Geon" Dispersion Drying Resin for Electrostatic Spray)
Pigment Dispersion (color desired)/1-10
"Geon" 140 Series Vynyl Resin/100
"Noda" Plasticizer/40
"Admex" 746 Plasticizer/Stabilizer/5
Thermolite 31 Stabilizer/4
Pigment Dispersion (color desired)/2-10
"Geon" Dispersion Drying Resin/5
"Paraplex" G-62 Plasticizer/Stabilizer/10
Calcium |
| 配制方法： |
If mixer is equipped with a steam jacket, preheat jacket to approximately 200F (93C). Charge all "Geon" 140 resin to mixer. Mix at high speed until temperature of mix is 140-150F (60-65C). Add liquid blend (masterbatch plasticizers, liquid stabilizers, and pigment dispersions,if possible.) Mix well until dry point is reached. this should occur from 170-220F (76-104C). Polymeric plasticizers should be preheated to 120-135F (48-57C) before adding. Add other ingredients, such as fillers, lubricants, dry pigments, etc. Hold out drying resin.
Drop mix from high-intensity mixer to a cooling mixer, such as a ribbon blender or other low-intensity, tumbling-type mixer. Drop temperature may depend on the plasticizer system; approximate temperature ranges are: 170-190F (76-87C) for monomeric plasticizers 190-220F (87-104C) for polymeric plasticizers Reduce mix temperature to 125F (51C) or lower. Add drying resin and thoroughly disperse. Due to the inadequate mixing action of some mixers used for cooli |
|
